ProSoft MVI56E-MCMR - Writing the Clock Value to the Module

Reference MVI56E-MCMR ♦ ControlLogix Platform
User Manual Modbus Communication Module with Reduced Data Block
Page 200 of 223 ProSoft Technology, Inc.
6.7.7 Writing the Clock Value to the Module
Expand the MVI56MCMRCLOCK controller tag.
Set the new Clock value in MVI56MCMRCLOCK.CONFIG
Move a value of 1 to MVI56MCMRCLOCK.WRITE
The bit will be automatically reset to 0.
To check the status of the message, refer to the WRITECLOCKMSG tag.