Protege PRT-CTRL-SE - 1.0 Welcome

1.0 Welcome!
Thank you for purchasing the Protégé® SE Integrated System Controller by Integrated Control
Technology. The Protégé® System is an advanced technology security system specically designed
to enhance the funconality of condominium and apartment security with exible local monitoring
and osite communicaon.
The Protégé® SE Integrated System Controller is the central processing unit of the Protégé® System.
The Protégé® SE Integrated System Controller communicates with all system modules, stores all
conguraon and transacon informaon, process’s all system communicaon and reports alarms
and system acvity to a monitoring staon or remote computer.
Flexible module network architecture allows large numbers of modules to be connected to the
RS-485 Module Network. Up to 250 modules can be connected to the Protégé® SE Integrated
System Controller in any combinaon to the network up to a distance of 900m (3000).
The current features of the Protégé® SE Integrated System Controller include:
• Internal industry standard 10/100 Ethernet
• 32 Bit advanced RISC processor with 2MB RAM and 4MB ash
• 16x high security monitored zone inputs
• NIST Cered AES 256 Bit Encrypon
When receiving the Protégé® SE Integrated System Controller you should nd the kit contains the
items listed below. The kit type is clearly labelled on the packaging and will tell you what your kit
contains. Please note that if you do not have the correct contents contact your distributor
immediately.
• Protégé® SE Integrated System Controller
• Protégé® SE Integrated System Controller Quick Start Guide
• 6x nylon spacers
• 36x 1K ohm resistors
• Red/black baery backup wires
• 2x Diode 1N4007 1A 400V (Axial)
For more informaon on the Protégé® SE Integrated System Controller and other Integrated Control
Technology products please login to www.incontrol.co.nz.
!
Indicates a warning or advisory message relang to the secon or locaon.
?
Indicates a hint or suggeson that relates to the secon or locaon.
[TEXT]
Bold text enclosed in brackets is used to show a secon number or address of
a programmable opon or informaon on programming shortcut sequences.
Italics
Italic text shows a reference to a secon, page, manual or website.
2