Tsunami QB-8100 Series (100 Mbps/5 Mbps Models) Installation and Management Guide 107
• Wireless Mask: FF:FF:FF:FF:FF:FF
Result: The unit blocks all traffic between Wireless Client 3 and the Ethernet network.
4.8.2.5 Static MAC Address Filter Configuration
To configuring Static MAC Filter
1. Click ADVANCED CONFIGURATION > Filtering > Static Mac Address Filter. The Static MAC Address Filter
screen is displayed as shown below.
Figure 4-50 Static MAC Address Filter
2. Click Add. The Static MAC Address Filter Add Row screen appears.
Figure 4-51 Creating a new Static MAC Address Filter
3. Enter the parameters listed in the following table.
Parameter Description
Wired MAC Address Specifies the MAC address of the device on the wired network
that is restricted from communicating with a device in the
wireless network.