Tsunami QB-8100 Series (100 Mbps/5 Mbps Models) Installation and Management Guide 174
7
Procedures
This chapter provides details about the various procedures involved in the operation of the QB-8100 units through the Web,
CLI, and SNMP interface.
The following topics are covered in this chapter:
• TFTP Server Setup
• Web Interface Firmware Download
• Configuration Backup
• Configuration Restore
• Text Based Configuration (TBC) File Management
• Hard Reset to Factory Default
• Forced Reload
• Upgrade a New Firmware Using ScanTool in Bootloader Mode
• Download a New Firmware Using CLI from Bootloader
To Next Page
Loading...
Need help?
General
