Tsunami QB-8100 Series (100 Mbps/5 Mbps Models) Installation and Management Guide 145
NOTE:
• Provide the Primary and Secondary Server details only if the SNTP status is enabled.
• For any reason, if the servers configured are not responding, the SNTP client retries every minute.
5.5 Access Control
The Management Access Control feature provides the option of controlling the management interfaces only from the specified
hosts. The user needs to update the table with an IP address, which provides access to management interfaces, such as SNMP,
HTTP, HTTPS, TELNET, and SSH.
To view and configure the Access Table Status and Management Access Control Table, click MANAGEMENT > Access
Control.
Figure 5-19 Management Access Control Table
To add a new IP Address, follow these steps
1. Select Enable for the Access Table Status.
2. Click Add to display the Management Access Table Add Row page.
Parameter Description
Access Table
Status
Enable or disable the Management Access
Control Table status. By default, it is
disabled.
IP Address Specifies the IP Address of the machine to
which the management traffic needs to be
allowed.
Entry Status Used to enable/disable a particular entry in
the Management Access Table.
To Next Page
Loading...
Need help?
General
