Tsunami QB-8100 Series (100 Mbps/5 Mbps Models) Installation and Management Guide 215
Hardware Specifications
Physical and Environmental Specifications
Security Features • Critical feature support via WORP for secure
long-range wireless deployments in
unlicensed frequency spectrum
• MD5 (embedded in WORP) authentication
between End Point A and End Point B
• MAC Authentication (Configured on End
Point A)
• Secure “over the air encryption” and
AES-CCM
• RADIUS MAC Access Control (Configured on
End Point A)
Tools • Site Survey (to be performed on End Point B)
• Link Test to determine the local/remote
signal/noise levels.
Management Interface Flexible and responsive management interfaces
through Web, CLI and SNMP. SNMPv3 support
facilitates secure management.
Category Specification
Radio 5 GHz dual stream MIMO radio
Clock Speed 333 MHz
Memory Flash: 16 MB
RAM: 128 MB
Input Power Power-over-Ethernet 48 VDC,0.40 A
Category Specification
Physical
QB-8100 Dimensions (H x W x L) 7.77 x 7.56 x 3.94 inches (197.5 x 192 x 100mm)
QB-8100 Weight 1.6 lbs (.73 kg)
Environmental
Storage Temperature -40º to 70ºC (-40º to 158º Fahrenheit)
Operating Temperature -33º to 55ºC (-40º to 131º Fahrenheit)
Humidity Max 95% relative humidity (non-condensing)
Water and Dust Proof IP65
Category Specification
To Next Page
Loading...
Need help?
General
