Tsunami QB-8100 Series (100 Mbps/5 Mbps Models) Installation and Management Guide 143
Figure 5-17 SYSLOG Host Table Add Row
Parameter Description
IP Address Represents the IP address of the SYSLOG server.
Port Represents the host port number. Default port is 514.
NOTE: The user must configure the correct port number on
which the syslog server is running for the Host Port
parameter. Choice of port number must be in line
with the standards for port number assignments
defined by Internet Assigned Numbers
Authority (IANA).
Host Comment Used to provide a note for the device administrator.
Entry Status Used to configure the status of the Syslog host entry table.
To Next Page
Loading...
Need help?
General
