Appendix
175
Chapter 9: Appendix
9.1 Updating system to a newer firmware version
System firmware updates are carried out using the especially approved
PRÜFTECHNIK USB memory stick ALI 17.451.
Check the PRÜFTECHNIK website [www.pruftechnik.com] to obtain the
latest version. If in doubt, please contact your local representative or
PRÜFTECHNIK Condition Monitoring.
If the update is acquired via the website, it must be transferred to the
approved memory stick before commencing the update.
Old PRÜFTECHNIK memory sticks must be disposed of in accordance to the direc-
tive on Waste Electrical and Electronic Equipment (WEEE).
9.1.1 Downloading the firmware from the PRÜFTECHNIK website
The file available for download is an .exe file. Download the file to the desired
directory on a PC.
Double-click the file to extract it to the approved memory stick. The following screen
with instructions on how to extract the firmware files into the memory stick appears.
H
Note
Note: The update .exe
file is referred to as
‘OPTALIGN smart Shaft
Firmware’.
Click ‘Browse’ to select the
location of the approved
PRÜFTECHNIK memory
stick, then click ‘Install‘ to
start file extraction.
To Next Page
Loading...
Need help?
General
