Configuration
155
Chapter 8: Configuration and data
management
8.1 Shortcut numbers
OPTALIGN smart computer menu items are accessed using the navigation keys. The
navigation direction is either upwards/downwards or sideways. Alternatively, use may
be made of the data entry keys which provide navigation shortcuts.
All context menu items are labelled with digits for quick access. The required
menu item is accessed directly by pressing the corresponding numerical data
entry key.
8.2 Configuration
The menu item ‘Configuration’ is used to configure the OPTALIGN smart computer
settings, the regional settings, default settings, shaft application settings, printing
settings and licencing of available applications.
With the computer switched on, access ‘Configuration’ by pressing
q twice. The
expanded menu as shown below appears.
With expanded menu displayed, use
f/g to highlight the context menu item
‘Configuration’, then press
e to confirm selection. The “Configuration” screen
displaying items that can be configured appears.
H
Note
To Next Page
Loading...
