PRÜFTECHNIK OPTALIGN smart RS5 BT User Manual

95
5.14.2 Printing reports
Using the default printer type ‘PDF file’, measurement reports may be saved as a PDF
to the approved memory stick ALI 17.451 then printed off any Windows printer or
network printer without disconnecting or reconfiguring the printer.
Reports can also be printed directly from the OPTALIGN smart computer to a printer.
To print the current measurement report, press
q twice, then use f/g to
highlight ‘Print’.
Press
e to confirm selection. The “Print report” screen appears.
The system provides the option of printing reports in four different formats. Use
f/g to highlight the desired format and then press e to print the selected
report.
Note: As may be seen
from the screen header,
the selected printer type
is the default – ‘PDF file’.
In this case, the report will
be saved as a PDF on the
approved memory stick.
Saving and printing

PRÜFTECHNIK OPTALIGN smart RS5 BT Specifications

General

Brand	PRÜFTECHNIK
Model	OPTALIGN smart RS5 BT
Category	Laser Shaft Alignment Tools
Language	English