Prusa i3 MK2S KIT - Page 42

● Then go to www.prusaprinters.org and choose Color Print in the header menu.
● Drag the gcode to frame and click on Add change button.
● Find the height of the layer where you want to make the color change. This can be
easily found in Slic3r under tab “Layers.” The scale along right side displays the
height of individual layers. Set this number to the box. Number of these changes is
unlimited.
● When you are done with your modification, download the file. This file is ready to be
printed!
Pict.   25   -   Web   version   of   Colorprint   interface   at   prusaprinters.org/colorprint
Insert the filament which you want to start with into your printer and start printing the file.
When the color change is triggered from the gcode the printer will follow simple procedure:
● Stop moving and retract
42