Pulsar FLOW PULSE - User Interface Structure

Page 18
The Flow Pulse Handheld has an internal temperature sensor that
monitors board temperature and will power-down the Flow Pulse
Handheld and taper charging rate when temperature rises beyond the
specified threshold.
User Interface Structure
Important Information
Charging should only be performed within an ambient temperature range of 0
to 45°C (32 to 113°F). Never perform charging where contact with liquid is
possible.
Always disconnect the charger and the Flow Pulse sensor before attempting any
form of cable or wire servicing.
Important Information
Due to the risk of the batteries igniting, under no circumstances should the
Flow Pulse Handheld be permanently powered from the charger or any
other external power source.
Totaliser
Trace
Flow
Settings 1
Record
Settings 2