Page 38
Chapter 4 Flow Pulse Handheld Parameters
Parameter System
Configuration parameters can be queried and set. With each parameter,
there is a factory default value, an associated access level which is required
for setting, and a valid range of values for each parameter.
The parameters are always stored and entered as whole numbers, and the
absolute range is from 0 to 65535, please refer to individual parameter for
individual range.
The terms “parameter” and “register” are used interchangeably as the
parameter number is the actual address of the storage register.
Parameter Access
Frequently used parameters are accessible via the Setting-2 menu.
All parameters for the Flow Pulse Handheld are accessible via the
“Manual Param” option on the Setting-2 menu.
For service access, select “Manual Param” on the Setting-2 menu, and set
p88 to the access code. If a valid code is entered, a “Parameter saved”
message will be shown, otherwise an error message is shown.
To Next Page
Loading...
