Pulsar FLOW PULSE - Device Info

Page 41
Factory Reset
94
Set to 4 to reset
Reset handheld
controller parameters
to factory default.
This does not affect
Flow Pulse.
Device Info
These parameters are read-only, and are usually only updated by the device.
Parameter
Addr
Def.
Notes
Controller Serial
Number
96 -
97
The serial number is equal to:
p96*65535 + p97
Controller Type
95
1
1 – Controller for Flow Pulse
Firmware Version
98
A 4-digit firmware version
number, larger is newer.
Hardware Version
99
A 4-digit firmware version
number, larger is newer.
Board Temperature
Displays the internal
battery/electronics temperature
in Celsius.
Storage Capacity
Capacity of data storage.
Available Storage
Unused storage space.