Pulsar FLOW PULSE - Service Parameters

Page 42
Service Parameters
These parameters are service only parameters, and should only be changed
with specific advice.
Parameter
Addr
Def
Notes
USB Function
70
2
0 – USB off
1 – SD card only
2 – SD + Serial port
3 - Serial port only
Low Power Warning
Threshold
81
7
Battery level below which a low
power warning is shown
Temperature
Warning Threshold
82
60
Temperature level above which
a warning is shown and power-
down sequence is activated. (in
Celsius).
RS-485 Baud Rate
84
4
0 – 1200
1 – 2400
2 – 4800
3 – 9600
4 – 19200
5 – 38400
6 – 57600
7 – 115200