Pulsar FLOW PULSE - Replaying Log Files

Page 29
When sleep/wake logging is in use, the icon will appear. The data
logging icon is also shown to indicate that logging is active.
To cancel sleep/wake mode, press the F2 key. If there is no response, the
Flow Pulse Handheld may have been powered-down. In such cases,
power-on the Flow Pulse Handheld and press the F2 key to cancel.
Replaying Log Files
The log files can be replayed on the Flow Pulse Handheld, or
transferred to a computer via USB for replay using Flow Pulse-PC (version
1.2.4 or later required).
The log files have a. flg (Flow Pulse Log) file extension.
To replay a log file using the controller, go to Settings-2ToolsReplay
Data File, this will bring up a File Explorer window. The folder icon
indicates available data folders, which correspond to site names that were set
when data was logged. Select the folder to view a list of available log files.
Select a file to start replaying.