EasyManua.ls Logo

Pylontech M1C-UL9540

Pylontech M1C-UL9540
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
3.1.7 Handling and installation of the cabinet
Outdoor battery cabinet needs to be handled by forklift or hoist lifting; When handling, move
carefully to avoid impact or fall.
Keep the handling process slow and smooth.
During moving, the tilt angle of the device shall not exceed 15°, and it shall not be suddenly
lowered or lifted.
Positions of the lifting rings and forklift slots:
Danger: Pay attention to the falling risk which can cause severe injury or death. Do not stand
under a lifted load. Make sure no unauthorized personnel are in the vicinity of a lifted load.
1. Use a lifting device to place the cabinet on the foundation, aligning the 6 fixing holes.
2. Install the 6 fixing bolts.
3. The fixing screws bolts should be protected by anti-corrosion paint to avoid rust.
lifting rings
forklift slots

Table of Contents

Related product manuals