67
3.3 Installation and Operation of the Battery System
3.3.1 Preparing tools and safety gear
Danger:
It is recommended to wear the following safety gear when dealing with the
battery pack.
Danger:
Il est recommandé de porter l'équipement de sécurité suivant lors de l’opération
de la batterie.
The following tools and instrument are required to install the battery system:
Type Tools and Instruments
Installation
Wire Cutter
Crimping Modular Plier
Cable Ties
Screwdriver Set
Electric Screwdriver
1000VDC Multimeter
Adjustable Wrench
Isolated Nut Drivers 1500V
Personal
protective
equipment
(PPE)
Anti-arc flash suit
Safety goggles
Safety shoes
NOTE
Use properly insulated tools to prevent accidental electric shock or short circuits.
If insulated tools are not available, cover the entire exposed metal surfaces of the available tools,
except their tips, with electrical tape.
To Next Page
Loading...
Need help?
General
