49
3.2.6.1 Remote Monitoring Setup
Ethernet Dongle
A. Open the dongle (Black device) enclosure and thread the Ethernet cable through the hole
and plug it into the RJ45 port.
B. Reassemble the dongle housing, plug into the Sol-Ark, and secure it with screws (x2,
M4x12)
If all is well, you will see solid red and green lights.
C. Register the dongle via the app or www.mysol-ark.com.
Wi-Fi (Via Cell Phone or computer)
A. Plug the Wi-Fi dongle into the Wi-Fi port on the LEFT side of the Sol-Ark
B. Using your device, look for an "EAP" network containing the last five digits of the dongle
S/N
C. Password: 12345678
D. Follow the instructions on the upcoming pages
3.2.7 PV (PowerView)APP of the Inverter
3.2.7.1 APP Connection and Setup
You can access PowerView on a computer with the link: http://www.mysol-ark.com
1. Download PV (PowerView) Pro App
NOTE: If you plan to add an install to your installer account for monitoring multiple installs, you must first make
the plant under the customer’s account.
Once created, the customer can share the plant, with Manager permissions, to the installer via the app (“…”
under My Plants) or webpage (press the “…” next to the plant name in Power View).
2. Create an Account and Sign In
iPhone: (Will only show up as PV Pro)
https://apps.apple.com/lk/app/powe
rview-pro/id1247121391
Android
https://play.google.com/store/apps/
details?id=com.elinter.app.powervie
w&hl=en_US&gl=US
PV Pro App-Tutorial Video PV Pro WebsiteTutorial Video
To Next Page
Loading...
Need help?
General
