MAIN MENU SETUP GUIDE QT426 User Manual
17 | Page
4. MAIN MENU SETUP GUIDE
Click right mouse or press ESC button on the front panel, the control bar will display on the bottom of the screen,
refer to Fig 4-1:
Fig 4-1 Main Menu Toolbar
Click the
icon beside the screen display mode, a channel select dialog will appear as shown below:
User can checkmark channels from 1-ch to 16-ch at random to display the live pictures. Then click
button
to confirm the setting.
Click the Menu
button, the interface will pop-up as shown in Fig 4-2; press MENU button on the front
panel or remote control will also display the main interface.
Fig 4-2 Main Menu
To Next Page
Loading...
Need help?
General
