DVR MANAGEMENT QT426 User Manual
50 | Page
Step 2: Click Refresh button to refresh the disk information of the list box; set the property of the disk then
click Apply button to save the setting
Step 3: Select the hard disk, click Format button to start format.
Note: all recorded files in the hard disk will be lost after formatted.
6.1.8 Upgrade
At present, it only supports USB update. Get the firmware from Q-See when there is a new firmware version,
and make sure it is the correct one for the DVR. User can check the USB information in Disk manager.
6.1.9 Logoff
Click Log off icon, a log off dialogue box will popup, click OK button, the device will log off. If user wants to log
in again, click
icon to enter user name and password to login again.
To Next Page
Loading...
