REMOTE SURVEILLANCE QT426 User Manual
54 | Page
Fig 7-6 PPPoE
DDNS: You can access the DVR through a static or dynamic IP address; however a dynamic address can
change from time to time. How often depends on your service provider. When it changes you need to go to a
website such as www.myipaddress.com from a computer attached to the same router as the DVR to find out
what the new IP address is. There are two solutions to this problem. One would be to get a static IP address
from your service provider so that you do not have to be concerned with the address changing. Another solution
would to use a dynamic domain name service to get a domain name that can be linked to your dynamic IP
address. We suggest myq-see.com or www.dyndns.com since the DVR is setup to accept account information
from these two domain name services.
NOTE: Before you setup DDNS you must first set up Port Forwarding as directed in Section 7.3 PORT
FORWARDING
To Next Page
Loading...
