REMOTE SURVEILLANCE QT426 User Manual
55 | Page
To setup the DVR for access through a dynamic domain name you go to the Main Menu and select the System
icon (Red box in Fig 7-1), then select the Network icon (Red box in Fig 7-2), this will display the NETWORK
screen shown in Fig 7-7. Put a checkmark in the DDNS option (Red box in Fig 7-7). Select the service you are
using from the drop down menu under the checkmark box and enter the account information you registered with
the domain name service. Click the Test button under the boxes where you entered the account information and
after you get the OK message in the lower left hand corner of the screen click on the Apply button . You will then
be able to access the DVR remotely by entering the domain name into a browser window on a remote computer.
This DVR supports DDNS provided by myq-see.com and www.dyndns.com. Instructions for setting up DDNS
through mwq-see.com is provided below.
Fig 7-7 DDNS
To Next Page
Loading...
Need help?
General
