QNAP QMiroPlus-201W User Manual

Setting Up the Router
1. Place your router in an environment that meets the requirements.
For details, see Installation Requirements.
2. Install the drives.
For details, see Installing 2.5-inch Hard Drives or Solid-State Drives on 2.5-inch Trays
3. Power on the router.
4. Check if the LED status is green.
For details, see LEDs.
5. Connect the router to the network and the computer.
For details, see Connecting the Router to the Internet.
6. Configure the router settings.
For details, see the following topics:
• Configuring the QTS Quick Start Wizard
• Configuring QuRouter
7. Log in with your QNAP ID or local account credentials.
For details, see Binding the Router with a QNAP ID.
QMiroPlus-201W User Guide
Installation and Access 19

QNAP QMiroPlus-201W Specifications

General

Brand	QNAP
Model	QMiroPlus-201W
Category	Network Router
Language	English