Removing a Node from the Wireless Mesh Network
You must reset the node in order to remove the node from the wireless mesh network and configure it as a
standalone router.
1. Go to QMiro Devices.
2. Identify the node.
3.
Click .
4. The Settings - [Device_Name]-[Location] window appears.
5. Click Reset.
A confirmation message appears.
6. Click OK.
QuRouter resets the node and removes the node from the wireless mesh network.
SD-WAN
About QuWAN
QuWAN is a QNAP cloud-based SD-WAN networking solution that provides a centralized control platform to
manage network functions of devices within its private network topology. QuWAN can intelligently and
securely direct traffic across the WAN network.
You can configure the SD-WAN settings on the router and access QuWAN Orchestrator to manage the SD-
WAN overlay network.
Configuring QuWAN Settings
1. Log in to QuRouter.
Note
If you are logging in with your QNAP ID for the first time, you are prompted to enter the local
account credentials as part of the 2-step verification process.
2. Go to QuWAN.
3. Configure the QuWAN settings.
Setting User Action
Organization Select an organization associated with your QNAP ID.
Note
If there are no organizations associated with your
QNAP ID, click Create or edit organization.
QuRouter redirects you to QNAP Account website
where you can create a new organization or edit an
existing one.
Region Select a region linked with the selected organization.
Click Add Region to create a new region.
QMiroPlus-201W User Guide
Network Settings 46
To Next Page
Loading...
Need help?
General
