10. QTS Management
The QuRouter web interface and QTS application allow you to remotely control the storage power features of
the QMiroPlus-201W router.
You can remotely restart QTS or shut down the QTS web interface feature of the router using QuRouter.
Configuring the QTS Quick Start Wizard
This topic describes how to configure the Quick Start wizard to set up the storage and router functions of the
QMiroPlus-201W router.
1. Open a web browser.
2. Enter 192.168.100.1 in the address bar.
The web browser opens the QuRouter landing page and displays a login confirmation message.
3. Click Log in to QTS.
The QTS login page appears.
4. Alternatively, access the QTS IP address using Qfinder Pro.
a. Locate the router on the list.
b. Identify the QTS IP address.
You can locate the default QTS IP address listed on the asset tag of the router.
c. Double-click the IP address.
The QTS login page opens on the default web browser.
5. Specify the default username and password.
Default Username Default Password
admin
The NAS MAC address without any punctuation and all letters capitalized.
Tip
For example, if the MAC address is 00:0a:0b:0c:00:01, the default
password is 000A0B0C0001.
The MAC address can be found on the asset tag on the rear side
of the device.
The QTS desktop page opens and the Quick Start wizard automatically opens.
6. Click Start.
The QuMagie information page opens.
7. Click QuMagie to start the QNAP photo management service.
8. Click Next.
The Data Management Apps page opens.
9. You can click the data management hyperlink to initiate the QNAP data management service.
10. Click Next.
The System Volume and QuRouter page appears.
11. Configure the storage volume settings.
QMiroPlus-201W User Guide
QTS Management 61
To Next Page
Loading...
Need help?
General
