QNAP QMiroPlus-201W User Manual

Note
To enable WPS using the push button on the router, see WPS Button.
c. Enable the WPS function on the client device.
Note
• Ensure that the client device is equipped with the WPS function. Typically, this function is
located in the Wi-Fi settings page.
• The location and feature name may differ depending on the product.
The client device joins the wireless network.
Clients and Blocked Clients List
The client list allows you to access wired and wireless clients connected to the router network. You can also
add clients to or remove clients from the blocked list.
The blocked list controls the management of clients blocked from accessing wired and wireless services.
Adding a Device to the Blocked List
1. Go to Clients > Blocked List .
2. Click Block client.
The Add Device to Blocked List window appears.
3. Configure the blocked list settings.
Setting User Action
Description Specify the device description.
Note
• The description must be between 1 to 20
characters.
• Valid characters: A–Z, a–z, 0–9
• Valid special characters: Hyphen (-), Underscore
(_), Period (.)
MAC Address Specify the MAC address of the device.
4. Select the interface.
5. Click Apply.
QuRouter adds the device to the blocked list.
Configuring a Device in the Blocked List
1. Go to Clients > Blocked List .
2. Identity a device.
QMiroPlus-201W User Guide
Network Settings 44

QNAP QMiroPlus-201W Specifications

General

Brand	QNAP
Model	QMiroPlus-201W
Category	Network Router
Language	English