9. QuRouter App
QuRouter
This section applies to QuRouter 1.0.0 (and later) for Android and iOS.
QuRouter is a QNAP mobile application that lets you configure and manage QMiro and QMiroPlus routers.
Go to the Google Play Store or the App Store to download QuRouter for configuring your QNAP router
through a mobile device.
To configure a new router, see Configuring the Router Using the QuRouter App.
To add a new node to the mesh network, see Adding a Node to the Mesh Network.
System Requirements
QuRouter is available on the following mobile platforms:
• Android 5.0 (or later)
• iOS 11 (or later)
Visit the Google Play Store or the Apple App Store to download the latest QuRouter version on your mobile
device.
Configuring the Router Using the QuRouter App
1. Open QuRouter on your Android or iOS device.
2. Tap Set Up New Device.
The Select a Device page appears.
3. Select the QMiro device.
4. Tap Start.
The Power on the Device page appears.
5. Tap Next.
The Connect to the Internet page appears.
6. Tap Next.
7. Verify the LED status.
For details, see LEDs.
8. Press the storage power button.
The storage functions are now accessible.
9. Tap LED Indications to check router LED indications and definitions.
10. Tap Next.
11. Connect the mobile device to the router using one of the following:
Connection User Action
Connect via Wireless Connect the mobile device to the router wireless function.
a. Go to Settings > Wi-Fi on your mobile device.
QMiroPlus-201W User Guide
QuRouter App 55
To Next Page
Loading...
Need help?
General
