For details, see Configuring QuRouter.
Performing QTS Power Actions
1. Select a method for accessing the QTS System Control feature.
• In the QuRouter web interface, go to Control Host.
• In the QTS web interface, open QuRouter and go to Control Host.
2. Perform the following actions on QTS.
Task Description Steps
Shut down QTS Use this action to shut down the storage
feature of the router.
On the QTS System Control screen:
• Click Shut down QTS.
A confirmation message appears.
• Click OK.
The router powers off the storage
feature.
Restart QTS Use this action to restart the storage
feature of the router.
When QTS becomes unresponsive, you
can manually restart it.
On the QTS System Control screen:
• Click Restart QTS.
A confirmation message appears.
• Click OK.
The router restarts the storage
feature.
QuRouter performs the specified action.
Viewing the QTS System Information
The QTS System Control page displays basic information regarding the storage feature of the
QMiroPlus-201W router.
1. Select a method for accessing the QTS System Control feature.
• In the QuRouter web interface, go to Control Host.
• In the QTS web interface, open QuRouter and go to Control Host.
2. Check the following QTS system information:
Information Description
CPU temperature The current temperature of the router CPU.
Fan speed The current fan speed of the router.
QTS IP address The current QTS IP address of the router.
QMiroPlus-201W User Guide
QTS Management 64
To Next Page
Loading...
Need help?
General
