To create a storage pool, see Creating a Storage Pool under Storage & Snapshots in the QTS User
Guide.
a. Click Storage & Snapshots.
The Storage & Snapshots application opens and the Data Collection Agreement page appears.
b. Click Yes.
The Quick Start wizard opens.
c. Click Skip to skip the quick start wizard.
d. Click Next.
The Use Snapshots in File Station page appears.
e. Click Next.
The Back up Data to Another NAS Using Snapshots page appears.
f. Click Finish.
g. Go to Storage Manager > Storage > Storage Space .
h. Perform one of the following actions.
Router State Action
No storage pools Click New Storage Pool.
One or more storage pools Click Create, and then select New Storage Pool.
The Create Storage Pool Wizard window opens.
i. Click Next.
j. Select an expansion unit from the Enclosure Unit list.
Important
• You cannot select disks from multiple expansion units.
• If the expansion unit is disconnected from the NAS, the storage pool becomes inaccessible
until it is reconnected.
k. Select one or more disks.
Warning
All data on the selected disks will be deleted.
Important
• For data safety, you cannot select disks that have the status Warning.
• The status In Use means that a disk is currently formatted as an external disk, and may
contain current user data.
l. Select a RAID type.
Number of disks Supported RAID Types Default RAID Type
One Single Single
Two JBOD, RAID 0, RAID 1 RAID 1
QMiroPlus-201W User Guide
QTS Management 62
To Next Page
Loading...
Need help?
General
