Enabling/Disabling Sounds8.4
You can enable or disable the system beeps separately:
• Beeps on keys
• Beeps on warnings and errors
How to Enable / Disable the Beeps
To enable or disable the beeps:
1. As a user:
Press and select the path: Preferences Sounds
2. Select Beep on key and/or beep on error check boxes.
3. Press [OK] to validate.
This is a user setting that only lasts as long as you are logged in.
Setting Default System Beeps
You can set the default beep state for user sessions.
How to Change the Beeps by Default
To change the sounds by default:
1. In supervisor mode (see How to Log in as Supervisor on page 122):
Press and select the path: Default user settings Default user prefer-
ences Sounds
2. Check Beep on key and/or Beep on error to enable the sounds.
3. Press [OK] to validate.
126
| Page 126 | Jan-13-2017 09:24 |
8
Configuring your Mailing System
To Next Page
Loading...
