quadient IN-360 Series - How to Set Postage for [Payment Surcharge Entry] Mail

How to Set Postage for [Payment Surcharge Entry] Mail
Required settings:
1. Make sure you are on the home screen of the [Normal] type of imprint.
The home screen indicates weight, postage and currently selected rate as illustrated
below
2. Check or change the type of imprint.
Press and access the Imprint screen:The type of imprint is indicated on line
2 of the screen.
To change the type of imprint:
- Select the Type line.
- Press [OK] and then select [Payment Surcharge Entry] in the Imprint screen.
- Press [OK].
The following screens appears:
40
| Page 40 | Jan-13-2017 09:24 |
3
Processing Mail