quadient IN-360 Series - How to Change the GEO Code

Changing GEO code
To change the GEO code manually, follow the steps below.
Changing the GEO code modifies the weight values the Mailing
System calculates. Make sure you enter the correct GEO Code to
ensure your weights are accurate.
How to Change the GEO Code
To change the GEO code:
1. In supervisor mode (see How to Log in as Supervisor on page 122):
Press and select the path: Machine settings Accessories and module
settings GEO code
2. See the table on the next page to get the 5 digit GEO code from your location altitude
and latitude, and enter the 5 digit using the keypad.
3. Press [OK] to validate.
8
Configuring your Mailing System
137
| Page 137 | Jan-13-2017 09:24 |