Diagnostics and System Data11.3
Diagnostics allow you to find the root cause of a an issue or a breakdown that may occur
during the life of your Mailing System.
The system performs tests automatically to diagnose the problem and generate
corresponding reports.
The System Data gives data about the status of the system and the errors that have
occurred.
Diagnostics
In supervisor mode, you can gain access to all the diagnostic data listed below:
CommentsDiagnosticNo.
Sends a message to a server (if connected) to check
the line.
Ping Server1
Reports the status ([0] or [1]) of the sensors below:
• Top doc
• Start print
• Cover
• Carriage
Sensors Status2
The screen displays, successively, a black bar without
text, then a text (Example: DELTA1).
Display3
Displays “Key OK” if the test is correctKeypad4
Checks the two USB ports (need USB keys).USB ports5
Checks the serial port.Serial Connection6
Checks LAN address.Ping Tool7
Checks LAN connection.IP Configuration Checker8
181
| Page 181 | | Jan-13-2017 09:24 |
11
Troubleshooting
To Next Page
Loading...
