quadient IN-360 Series - How to Process [Pass Through] Mail

2. Check or change the type of imprint:
Press to access the imprint screen:
To change the type of imprint, select the Type line, press [OK] and then select
[Pass through] in the Type of imprint screen and press [OK].
To select an option in the screen: Highlight the option using
the arrow keys and Then press to validate your
selection.
3.
Press or to return to the home screen.
You are now ready to process mail.
Processing [Pass through] Mail
How to Process [Pass Through] Mail
1.
Press . System motors start running.
2. Insert the envelope into the mail path against the rear-guide wall, side to be printed
facing upwards.
3. The Mailing System applies postage and the envelope is ejected.
3
Processing Mail
47
| Page 47 | Jan-13-2017 09:24 |