quadient IN-360 Series - Weighing Settings; How to Change the Default Weighing Type

Weighing Settings8.8
The weighing settings include:
• Setting a default weighing type used for mailing
• Activating / De-activating the WP Automatic Selection functionality
• Zeroing the weighing platform
• Setting the GEO code that corresponds to the geographical location of the Mailing
System
Default Weighing Type
How to Change the Default Weighing Type
This setting defines both the weighing device and the weighing type that are selected by
default when a user starts the mailing process (see Choosing a Weighing Type on page
51).
To change the default weighing type:
1. In supervisor mode (see How to Log in as Supervisor on page 122):
Press and select the path: Default user settings Base settings
Default weighing type
2. Select a default weighing type in the list.
3. Press [OK] to validate.
133
| Page 133 | | Jan-13-2017 09:24 |
8
Configuring your Mailing System