Setting the Headset Alignment
Aligning the print heads is required if there is an alignment issue between the top and the
bottom of the imprints.
Your Mailing System requires the heads to be aligned after each
cartridge change.
How to Align the Print Heads
To align the print heads:
1. In supervisor mode (see How to Log in as Supervisor on page 122):
Press and select the path: Maintenance Ink Cartridge Headset
alignment
The Set headset alignment screen is displayed.
2. Press [OK] and put a piece of paper in the mail transport.
The system prints a test pattern.
168
| Page 168 | Jan-13-2017 09:24 |
10
Maintaining your Mailing System
To Next Page
Loading...
