quadient IN-360 Series - How to Edit; Modify a Job Memory; How to Delete a Job Memory

6. Repeat the previous step until the system displays the name of the new job memory
in the list.
7. You can modify any preference by using the Edit/Del function (see How to Edit /
Modify a Job Memory on page 145).
How to Edit / Modify a Job Memory
To edit or modify a job memory:
1. In supervisor mode (see How to Log in as Supervisor on page 122):
Press and select the path: Impression memory
2. Select a job memory from the list displayed on the screen.
3. Press [OK] to validate.
4. Select the menu path Edit.
The Job memory modification screen is displayed.
5. Use the arrows to select the preferences, then press [OK] to modify the parameters.
6.
Press to finish.
How to Delete a Job Memory
To delete a job memory:
1. In supervisor mode (see How to Log in as Supervisor on page 122):
Press and select the path: Impression memory
2. Select a job memory from the list of saved job memories.
3. Press [OK] to validate.
4. Select the menu path Delete.
5. Press [OK] to confirm to delete the job memory.
8
Configuring your Mailing System
145
| Page 145 | Jan-13-2017 09:24 |