Automatic Date Advance
The Automatic Date Advance function automatically changes the date printed on mail
pieces at a pre-set time to the next 'working day' date.
Example:You can set the system to change dates at 17:00 hours and set Saturdays and
Sundays to be non-working days. From Friday 17:00 hours to Sunday 23:59, the system
will print Monday's date on the envelopes, after a confirmation message to the user.
How to Set the Automatic Date Advance Time
To set the auto date advance time and days:
1. In supervisor mode (see How to Log in as Supervisor on page 122):
Press and select the path: Default user settings Default imprint
parameters Automatic date advance
The Automatic date advance screen is displayed.
2. Select ON and press [OK] to enable the Auto Date Advance function.
3. Select Set Hours, enter the Automatic Date Advance time (00:00 hours is not allowed)
and press [OK].
4. Select Set working days, following by the day number on the keypad to select/deselect
each day, and then press [OK].
5.
Press to exit.
142
| Page 142 | Jan-13-2017 09:24 |
8
Configuring your Mailing System
To Next Page
Loading...
