Processing [Standard] Mail
Mail processing mainly depends on the weighing method you have chosen. It is indicated
by the icon in the Weighing Type zone of the screen.
If you need to change the current account before applying postage
(on account-enabled configurations), see How to Change Account
on page 48.
How to Process [Standard] Mail
In mode Standard Weighing ( ):
From the [Standard] home screen, to print postage directly on mail pieces:
1. Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the Weight area of the screen and the
postage amount is updated.
2.
Press . The system motors start running.
3. Withdraw the envelope from the WP and insert it into the mail path against the
rear-guide wall, with the side to be printed facing upwards.
If you want to seal the envelope, first engage the flap into the
moistener (option). Do not try to moisten self-adhesive envelopes.
4. The Mailing System prints postage and the mail piece is ejected.
3
Processing Mail
37
| Page 37 | Jan-13-2017 09:24 |
To Next Page
Loading...
