quadient IN-360 Series - How to Display Hardware Data; How to Display the Error Lists

How to Display Hardware Data
To display hardware data:
1. In supervisor mode (see How to Log in as Supervisor on page 122):
Press and select the path: Maintenance System info Hardware
information
2. The system hardware data appears on the screen.
How to Display the Error Lists
To display the error lists:
1. In supervisor mode (see How to Log in as Supervisor on page 122):
Press and select the path: Maintenance System info Error list
2. Select the Base errors list or the PSD errors list or Server connection history
3. Press [OK] to validate.
4. The system displays the selected list in a table, for each error:
The Error / Error code
The Date when the Error occurred.
The Cycles count when the error occurred.
The Description
The Category
5. Note the Code and refer to your customer service.
11
Troubleshooting
183
| Page 183 | Jan-13-2017 09:24 |