quadient IN-360 Series - Postage Imprint Default Settings; How to Change the Default Rate

Postage Imprint Default Set-
tings
8.9
The settings of the postage imprint 'by default' include:
• Imprint default settings: sets the default rate, ERA and slogan for mailing operations
• Automatic Date Advance: enables early date change to continue printing postage
with the new date after post office closing hours
• Printing offset: sets the default offset print position from the right side of the envelope.
Imprint Default Settings
You can set default parameters for the indicia and imprint elements that follow:
• Rate
• ERA
• Slogan
On list screens, a mark indicates the default parameter.
Changing the Default Postage Rate
Use the procedure below to change the rate the machine activates at start-up.
How to Change the Default Rate
To change the default rate:
1. In supervisor mode (see How to Log in as Supervisor on page 122):
Press and select the path: Default user settings Default imprint
parameters Default rate
2. Select the default rate using the rate wizard.
3. Press [OK] to validate.
See also
• Managing Postal Rates on page 161.
140
| Page 140 | Jan-13-2017 09:24 |
8
Configuring your Mailing System