quadient IN-360 Series - Printing Incoming Mail with [Received] Mode; How to Set [Received] Mode Printing

Printing Incoming Mail with
[Received] Mode
3.4
In [Received] Mode Section
This section describes how to use the [Received] type of imprint, to:
• Print the date on incoming mail, and/or
• Print 'Received' on incoming mail
See also
• About the use of this Type of imprint, see Choosing a Type of Imprint on page 25.
Setting [Received] Mode printing
The procedure below outlines steps required to imprint incoming mail.
You must begin with selecting the Type of imprint to gain access to the corresponding
parameters and be able to run mail.
Make sure you have completed the preparation steps mentioned
in Preparing and Starting your Work Session on page 27.
How to Set [Received] Mode printing
Required settings:
1. Make sure you are on the home screen of the [Received] type of imprint.
The type of imprint is indicated at the top of the home screen as illustrated.
43
| Page 43 | | Jan-13-2017 09:24 |
3
Processing Mail