Details on the Weighing Modes
All weighing options listed below may not be available in your
Mailing System. Check with customer service to see how you can
easily add weighing features to your Mailing System via online
services.
•
Manual Weight Entry
In this mode, you enter the weight manually (see How to Enter the Weight Manually
on page 54).
•
Standard Weighing
In this mode, each mail piece is manually placed on the Weighing Platform, and then
put into the mail path.
•
Differential Weighing (optional)
This mode speeds up the weighing process and increases your efficiency: all the
mail pieces are stacked together on the Weighing Platform. Remove the pieces one
by one and put them into the mail path.The Mailing System calculates the postage
and prints the mail piece automatically.You can leave all the mail pieces in a tray
on the Weighing Platform: the Mailing System will ask you to confirm printing for the
last item removed (from the tray).
Changing the Weighing Type
At start-up, the default weighing type is active.
See also
• To change the default weighing mode in supervisor mode, see How to Change the
Default Weighing Type on page 133.
• To change the weighing type according to the type of process you want to run (see
Choosing a Weighing Type on page 51), follow the steps outlined below.
52
| Page 52 | Jan-13-2017 09:24 |
3
Processing Mail
To Next Page
Loading...
