5. Press [OK] to start the connection to the Postal Server.
If the crediting process is successful, the system displays a successful message.
If crediting fails, the system displays a failure message and the amount that you may
actually add, depending on your postal account balance.
In the case of a communication error, the amount previously entered
cannot be changed. Check connection settings (see Connection
Settings on page 146).
6. You can open the Credit Used / Credit Available screen to check your account balance
once the transaction is complete (see How to Check the PSD (Meter) Credit on page
66).
See also
• In supervisor mode, you can set the Mailing System to ask for a PIN code for crediting:
see How to Set/Cancel a Crediting PIN Code on page 132.
68
| Page 68 | Jan-13-2017 09:24 |
4
Money Operations
To Next Page
Loading...
