2. Select 'Account with pin code'.
3. Press [OK] to confirm.
4. If required, enter the PIN code and press [OK].
How to Display and Change the 'Account Mode'
To display and change the 'Account mode':
1. As supervisor (see How to Log in as Supervisor on page 180):
From the main menu, select the path: Account Management Account Mode
Selection
The Account Mode Selection screen is displayed with the current 'Account Mode'
shown.
2. Select the desired 'Account mode'.
3. Press [OK] to confirm.
4. If required, enter the PIN code and press [OK].
6
Accounts and Access Control
115
| Page 115 | Jan-27-2023 01:28 |
To Next Page
Loading...
Need help?
General
