quadient iX-1 Series User Manual

4. Enter the name of the new imprint memory, then press [OK].
5. Enter the preferences, press [OK] to validate and display the next list of parameters,
if any.
6. Repeat the previous step until the system displays the name of the new imprint
memory in the list.
7. You can modify any preference by using the Edit/Del function (see How to Edit /
Modify an Imprint Memory on page 206).
How to Edit / Modify an Imprint Memory
To edit or modify an imprint memory:
1. As supervisor (see How to Log in as Supervisor on page 180):
From the main menu, select the path: Predefined Imprint Management
2. Select an imprint memory from the list displayed on the screen.
3. Press [OK] to validate.
4. Select the menu path Edit
The Imprint memory modification screen is displayed.
5. Use the arrows to select the preferences, then press [OK] to modify the parameters.
206
| Page 206 | Jan-27-2023 01:28 |
10
Configuring your Mailing System

quadient iX-1 Series Specifications

General

Brand	quadient
Model	iX-1 Series
Category	Digital Mailing system
Language	English