3. Press [OK] when the process is complete.
The message "Transaction successful" is displayed.
How to Withdraw the PSD (Meter)
The Withdraw PSD process is only to be completed at the request of Customer Service.
• Removes the PSD from service.
• Requires a password from Customer Services to perform.
To withdraw the meter:
1. As supervisor (see How to Log in as Supervisor on page 180):
From the main menu, select the path: Maintenance Processes Withdraw
The Withdraw meter screen is displayed.
2. Type the withdrawal PIN code using the keyboard and press [OK].
3.
Press [OK] or the [Sleep/Wake] button ( ) to turn the system to Sleep or
Soft-off mode.
4. ONLY at that stage, disconnect the system power cord from the power socket.
12
Maintenance
249
| Page 249 | Jan-27-2023 01:28 |
To Next Page
Loading...
