Service Processes12.2
How to Run the Registration Update
The Update Registration process is only to be completed at a
request from Customer Service.
• This procedure is used if you have changed your address.
• Contact your Customer Service to change your information
then you will be instructed to perform the update
registration procedure.
To run the registration update:
1. As supervisor (see How to Log in as Supervisor on page 180):
From the main menu, select the path: Maintenance Processes
A confirmation message is displayed.
2. Press [OK].
3. Select Update registration.
246
| Page 246 | Jan-27-2023 01:28 |
12
Maintenance
To Next Page
Loading...
Need help?
General
