4. Press [OK] to test imprint.
Imprint Test as below:
5. A message is displayed: "Check your imprint."
- If your setting are not correct, press "OK" to do again.
- Else if your imprint quality is bad, press "Cleaning" to clean the cartridge.
How to Use an Imprint Memory
Imprint Memories allow you to create a preset memory that can include the rate, custom
text, slogan and date mode for the Type of stamp you would like to use.
In account-activated configurations, Imprint Memories allow you assign postage costs
to pre-selected accounts.
If your mail requires different settings, then the imprint memories
are the solution: all your settings are stored in a single memory.
Just press the imprint memory key instead of multiple keystrokes
to select all the required elements.
To prepare imprint memories as supervisor, see Imprint Memories on page 205.
To use an imprint memory:
3
Processing Mail
79
| Page 79 | Jan-27-2023 01:28 |
To Next Page
Loading...
Need help?
General
